Intel Atom® C3000 based Type 7 COM Express Module
-Based on new COM Express Type 7 pinout with Intel Atom® processor C3000 series
-DDR4-2133/2400 ECC/Non-ECC SDRAM on Three SO-DIMM Sockets, up to 96GB
-4x 10GbE KR
-4x USB 3.2 Gen 2, 4x USB 2.0, 2x SATA III, 1x PCIe Gen 3 x8, 2x PCIe Gen 3 x2, 3x PCIe Gen 2 x1
-Wide-Temp (-40℃ to 85℃) on Selected SKUs
T/AX-DSFPX is a low-cost single-width AdvancedMC module with two 10GbE LAN/WAN network SFP+ ports.
It is a valuable supplement to 10GbE/XAUI fabric switches in MicroTCA chassis and AdvancedTCA carrier board to extend the number of external 10GbE SFP+ ports and to provide Ethernet protocol conversion between AMC fat-pipe ports and front-panel SFP/SFP+ ports. The AMC interface supports 10GBASE-BX4 (XAUI) and 10GBASE-R/KR PCS on ports 4-7/8-11. The front-panel SFP/SFP+ uplink ports support 10GBASE-R and 1000BASE-X PCS with fiber length of up to 80km using SM fiber. Programmable swapping of front-panel uplink SFP+ ports, as well as secure communication and traffic statistics are supported. Complies PICMG AMC.0, AMC.2, MTCA.0 specifications.
TORNADO-AZ/FMC is a low-cost single-width AdvancedMC module with Xilinx XC7Z100 largest Zynq-7000 AP SoC FPGA and FMC-site. It is designed for reliable 24/7 industrial operation.
Zynq-7000 AP SoC FPGA includes PS with 2x ARM Cortex-A9 and I/O peripherals, and PL with high-capacity logic/memory/DSP48 and 12.5Gbps GTH transceivers. The on-board memory includes 6GB DDR3, FLASH and NVRAM memories, and front-panel slot for microSD card. The AMC interface includes 10Gbps/12.5Gbps Fabric-DEFG ports 4-7/8-11 for in-chassis streaming I/O and Fabric-A 1GbE ports 0/1 for remote control and in-chassis AMC-to-AMC communication. Multi-color front-panel LEDs are provided to indicate user defined events from Zynq PS/PL applications. Application specific I/O is adopted via VITA57.1 FMC HPC/LPC module with AD/DA, SFP+, QSFP, MPO-MTP, etc.
The MMC firmware is based on the proprietary TAMMC G2 MMC kernel. MMC performs power and temperature management of the device and automatically locks/unlocks the device on critical conditions for reliable and safe functionality.
TASDK tools are used to remotely control the device and develop Zynq/PS ARM and remote control applications (Windows, Linux, Android) using unified cross-platform high-level Zynq/PS API and Host API. Multithreaded Zynq/PS ARM applications are developed using Linux, FreeRTOS and pre-certified Microsoft Azure ThreadX RTOS for demanding requirements.
The board can also be used as a stand-alone/embedded controller.
Key Features:
– Complies PICMG AMC.0, AMC.1, AMC.2, AMC.4, MTCA.0
– Xilinx XC7Z100 Zynq-7000 AP SoC FPGA (XC7Z035/XC7Z045 are optional)
– 1GB x32 DDR3, FLASH and MRAM memories, 32GB MicroSD-card slot for Zynq/PS
– 4GB x64 DDR3 for Zynq/PL
– AMC Fabric-DEFG ports 4-7/8-11 via FPGA GTX (10Gbps/12.5Gbps) (AMC.1 PCIe, AMC.2 Ethernet, AMC.4 SRIO)
– AMC Fabric-A 1GbE ports 0-1 via Zynq/PS 1GbE ports for remote control and in-chassis AMC-to-AMC communication
– VITA57.1 FMC site with 160 I/O (1.2V-3.3V), 8x 10Gbps/12.5Gbps GBTs, various FMC activation modes
– Stand-alone/embedded operation from +12V power supply
