Archives

3U CompactPCI Intel® 6th Gen. Quad- Core™ Processor Blade
Intel® latest 6th Gen 14nm Xeon®/Core™ processor with CM236 PCH
Up to 16GB DDR4-2133 soldered memory with ECC or Non-ECC
Multi-option storage as 2.5″ SATA, Cfast, Mirco SD, etc
2 RJ45 GbE LAN, 2 USB3.0, 1VGA on front 4HP panel
1 RJ45 COM, 1 HDMI, 1 USB3.0, 2 M12 X-Coding or 2 RJ45 GbE LAN on 8HP XTM-1 front panel
4 M12 X-Coding or 4 RJ45 GbE LAN on 8HP XTM-2 front panel
Design to meet EN50121-4 & EN50155 for railway application
PICMG2.0 R3.0, PICMG2.1 R2.0 compliant

The TCP270 is a standard 3U CompactPCI carrier that provides front I/O and rear I/O for a single width PMC module. This PMC to 3U CompactPCI adapter is used to build modular, flexible and cost effective I/O solutions with PMC devices in CompactPCI systems.

32 bit / 33 MHz accesses are supported on the PCI bus. The TCP270 is used as a mechanical adaptor to connect a standard PMC module in 3U CompactPCI systems.

The TCP270 supports PMC front I/O and optional CompactPCI rear I/O at CompactPCI connector J2/P2. The pin assignment corresponds to the PICMG 2.3 R1.0 PMC on CompactPCI signal mapping.

The use of PMC I/O on the J2/P2 connector (TCP270-11) precludes the use of 64 bit CompactPCI backplanes.

The TCP270 carrier complies with the PICMG 2.0 Revision 3.0 CompactPCI specification.

Operating temperature range is -40 °C to +85 °C.

The TCP262 is a standard 6U CompactPCI carrier that provides front I/O and rear I/O for up to two single width PMC modules.

Based on a Texas Instruments PCI to PCI Bridge with a 32bit 66MHz primary and secondary interface, the TCP262-10R supports a 32bit 66MHz CompactPCI bus and two 32bit 66MHz PMC modules on the local PCI bus of the TCP262.

A transparent PCI to PCI Bridge is used as the PCI bridging device between the primary CompactPCI bus and the on-board secondary PCI bus where the two PMC slots reside.

The TCP262 supports standard PMC front I/O and CompactPCI rear I/O fully compatible to the TCP260. The PMC slot 2 (upper PMC) I/O lines are connected directly to the CompactPCI connector J5. The PMC slot 1 (lower PMC) I/O lines are connected directly to the CompactPCI connector J3.