Archives

The HEITEC HeiPac Vario-A CPCI-S is a 4U vertical-mount chassis that holds up to eight 3U slots at a 0.8” pitch. The modular card guides can be adjusted to allow 1.0” pitch or other spacing in .2” increments. The standard PSU is a fixed 350W ATX, but other options are available. Conduction-cooled card guides are also available for testing and development. The chassis is 42HP wide.

The HeiPac Vario-A CPCI-S has various power and backplane configuration options. Consult HEITEC for off-the-shelf options and tailored configurations.

– Very cost effective platform
– 4U vertical-mount chassis platform that accepts 3U CompactPCI Serial boards
– Supports RTMs for rear I/O
– Up to 9 slots at 0.8” pitch
– Card guides can be adjusted in .2” increments to accept various slot pitches
– System Slot on the right enables use of an 8 HP CPU module without giving up one of the CompactPCI serial slots
– Bottom-to-top cooling configuration. Front-to-rear cooled version is also available.
– Fixed 350W ATX (other PSU options are available upon request)
– Customization available

Rugged, versatile, economic – the SRS-3201-BLUBOXX series of miniature CompactPCI® Serial IPC systems from EKF is suitable for all industrial requirements, even under harsh conditions. The small rack is built of high-quality 19-inch components. With its low dimensions of only 172mm x 168mm x 208mm (4U/32HP), the BLUBOXX provides space for up to five CompactPCI® Serial boards (single size Eurocard style). The BLUBOXX systems include a bottom mount fan unit and an industrial grade removable power supply.

CompactPCI® Serial (CPCI-S.0) is a PICMG® standard for modular industrial computers, which provides high speed serial I/O (PCI Express®, SATA, USB, Gigabit Ethernet) over the backplane. The SRS-3201-BLUBOXX rack is equipped with a 5-slot backplane. While the system slot is reserved for a CompactPCI® Serial CPU card (4HP or 8HP front panel assembly width), two fat pipe peripheral slots (PCIe x 8) and another two standard peripheral slots are available for I/O cards and storage modules.

The SFV-RAY is a CompactPCI® Serial carrier card for the Vector VN7610 and similar Vector FlexRay/CAN-FD compact interfaces.
As a supplier of the automotive industry, Vector is well known for their platform of software tools. By means of the SFV-RAY, Vector solutions can be easily integrated into CompactPCI® Serial systems.
A Vector VN-series interface module can be attached on-board to D-Sub and USB receptacles. Two front panel D-Sub connectors emulate a Vector splitter cable, in order to separate FlexRay and/or CAN ports. The SFV-RAY is equipped with an on-board USB controller and can be installed into any peripheral slot of a CompactPCI® Serial backplane.