Archives

The ATC806 is ideal for broadband media servers or other applications requiring the versatility of a powerful 40G or 10G ATCA switch with dual integrated AMC slots. The switch provides two ports of 40GbE/10GbE to Zone 3 RTM, 13 ports to the Fabric Channel and one port to the Update Channel.

Each slot can run 10G or 40G speeds for up to 640G of aggregate bandwidth. A mux selection allows the 40GE or 10GbE to interface together with the GbE signals. Two ports also have a mux selection for routing to the RTM. An RTM can be ordered separately, contact VadaTech for details.

Linux OS is standard on the ATC806, consult VadaTech for other options.

CompactPCI® Board with 4 CAN or 4 CAN FD Interfaces

CompactPCI Board with FPGA for 4x CAN FD via DSUB25
– 4 CAN FD interfaces according to ISO 11898-2
– Bus mastering and local data management by FPGA
– PCI bus conform to PCI Local Bus Specification 3.0
– Selectable CAN termination on board
– Supports MSI (Message Signaled Interrupts)
– Optional extended temperature range: -40° C … +85° C

Wide Range of Operating System Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries are available
– ISO 16845:2004 certified esd Advanced CAN Controller (esdACC)
– High resolution hardware timestamps

Modern Transceiver Technology
– esd Advanced CAN Controller (esdACC) offers highest CAN performance and diagnostic

Customization on Request
– IRIG-B input
– Error simulation support
– All signals via Rear I/O (P3)
– 2x CAN FD via DSUB9

The SN5-TOMBAK is a peripheral slot card for CompactPCI® Serial systems. The board is equipped with a dual port 10Gbps Ethernet controller. Both ports are available via SFP+ front bezel connector cages, suitable for attachment of either optical cables via SFP+ transceivers or SFP+ twinaxial copper cables. The Intel® 82599ES Ethernet NIC is known for its high performance, low latency, reliability, and flexibility, and is backward compatible to 1Gbps and 100Mbps speeds.

The SN5-TOMBAK is based on PCI Express® 2.1 (up to 5GT/s) and supports x1, x2, x4 and x8 link widths. For optimum performance, the board should be installed in a CompactPCI® Serial fat pipe slot. The SN5-TOMBAK is well suited for high performance industrial networking applications. Drivers are available for all major operation systems.