Archives

The XCalibur1700 is a high-performance 6U CompactPCI single board, multiprocessing computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With dual PowerPC e500 cores running at up to 1.2 GHz, the P2020 delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1700 provides up to 8 GB DDR3-800 ECC SDRAM, two PrPMC/XMC slots, as well as 512 MB of NOR flash (with redundancy). The XCalibur1700 also supports three Gigabit Ethernet ports, I²C, PMC I/O, XMC I/O, and RS-232/422/485 serial ports out the front panel or J5 connector.

The XCalibur1700 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. For customers seeking a lower power option the XCalibur1700 can be designed with the Freescale P1020 processor offering a reduction of approximately 7 W. Operating system support for Wind River VxWorks, Green Hills INTEGRITY-178, QNX Neutrino, and Linux is available.

Advanced Mezzanine Card (AMC) with Freescale quad core QorIQ® P3041

The NAMC-QorIQ-P3041 is a powerful single-width mid- or full-size AdvancedMC (AMC) processor board designed around the high-performance Freescale quad core P3041 with SATA, PCIe, SRIO and XAUI interface.

The NAMC-QorIQ-P3041 is designated for today’s packet oriented telecom applications such as LTE or VoIP. Additionally the NAMC-QorIQ-P3041 can be used as general purpose CPU in medical, industrial automation, defence & aerospace applications demanding high data throughput and multi-core processing power combined with dual SATA interfaces.

P3041
The P3041 is a multi-core packet processor offering four 32-bit e500mc cores with up to 1.5 GHz. It provides security and pattern match engines, sophisticated buffer and queue management hardware, and additionally various high speed serial data links.

The P3041’s e500mc cores can be combined as a fully-symmetric or as fully asymmetric multi-processing, system-on-a-chip. The ability of the cores to run different operating systems, or run OS-less, provides the user with significant flexibility in partitioning between control, datapath, and applications processing.

The P3041 packet processor is accompanied by a set of supporting hardware blocks for time keeping/tracking as well as for external protocol processing/conversion and acceleration. Dual SATA ports provide high-speed, low-cost storage options for statistics or large databases.

The combinations of storage interface, fat pipe combinations of PCIexpress, SRIO and XAUI address the need of applications of a cost-efficient solution compared to the P40 and P50 family members. The P3041 is designed for combined control and dataplane processing enabling high-performance Layer 2-7 processing.

The rich feature list of the P3041 CPU turns the NAMC-QorIQ-P3041 into a state-of-the-art packet processing board.

Thus, the board is ideally suited for applications in ATCA and MTCA environments.

NAMC-8569-ATM

Advanced Mezzanine Card (AMC) CPU Board featuring data exchange between
optical OC3/STM1 ATM traffic, Ethernet and TDM data

Flexibility, high-bandwidth and low latency processing dedicate the NAMC-8569-ATM for applications in telecommunication and defence communication market.

The front Ethernet interface can be switched or multiplexed towards the CPU and the backplane. Depending on the required throughput one Fat Pipe (PCIe or SRIO) or the combination of both Fat Pipes (PCIe and SRIO) are available to the backplane. Thus, the NAMC-8569-ATM is targeting at ATM based applications where IO boards need PCIe and where low latency of SRIO for multiprocessing is requested.

Latest Freescale PowerQUICC® III MPC8569 processor:
– dual Multichannel Communication Controller (MCC)
– higher core frequency than predecessor PowerQUICC III processors
– up to 1GB DDR2 SDRAM at 800MHz, 128MB flash

Lattice FPGA
– up to 70.000 logic cells

Interfaces at front panel
– 1x Gigabit Ethernet (GbE)
– 2x OC3 SFP

Backplane connections
– 2x Gigabit Ethernet (GbE)
– Serial Rapid IO (SRIO)
– PCI Express (PCIe)

TDM and I-TDM
– 125 μs and 1 ms I-TDM modes as well as TDM cross-connect supported