Archives

August 18, 2015

CPCIserial-CAN/402

CPCIserial-CAN/402-2 is a CompactPCI® Serial (PCIe®) Board with 2 CAN Interfaces

CompactPCI Serial Board with Altera® FPGA for 2x CAN via DSUB9 Connectors
– High-speed CAN interfaces acc. to ISO 11898-2, bit rate up to 1 Mbit/s
– Bus mastering and local data management by FPGA (esdACC)
– PICMG® CPCI-S.0 standard supporting high speed PCI Express® interface lines
– Selectable CAN termination on board and cut-out in the front panel for jumper view
– Supports MSI (Message Signaled Interrupts)

Wide Range of Operating System Support and Higher Layer Protocols
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries are available
– ISO 16845:2004 certified esd Advanced CAN Controller (esdACC)
– High resolution hardware timestamps

Customization on Request
– Extended temperature range: -40° C … +75° C
– Error simulation support
– All signals via Rear I/O (P3)

March 10, 2015

CPS3410

3U CPCI-S.0 Quad Gigabit Ethernet Controller

The CPS3410 is a 3U CompactPCI® Serial board providing four Gigabit Ethernet interfaces by RJ-45 connectors on the front panel. All four interfaces are controlled by the Intel® I350 Ethernet controller which is connected to the backplane by one x4 PCI Express® link.
The Intel® I350 Ethernet controller provides a powerful set of features that include I/O virtualization and QoS features, Energy Efficient Ethernet (EEE), as well as support for Jumbo Frames (up to 9.5 KB) and PXE boot option. On top of that the Intel® Advanced Network Services (ANS) software package adds support for Adapter Teaming, Load Balancing or 802.1q VLANs.

– Latest Ethernet technology – Intel® I350 Quad GbE Controller
– x4 PCI Express® 2.0 interface to the backplane
– Rugged design, optionally with P6 for improved mechanical stability
– Hot swap support
– Version for extended temperature range E2 (-40°C up to +85°C)

March 10, 2015

CPS3402

3U CPCI-S.0 Dual 10GBASE-T Ethernet Controller

The CPS3402 is a 3U CompactPCI® Serial board providing two independent copper 10 Gigabit Ethernet interfaces by RJ-45 connectors. The board gives bandwidth-intensive applications a cost effective solution to integrate latest 10GbE network performance.
The CPS3402 is equipped with the Intel® X540 controller which is manufactured as single-chip solution with integrated MAC controller and two 10GBASE-T PHYs. For a smooth transition and easy migration to 10GbE, the Ethernet controller provides the ability to auto-negotiate between 100 Mb/s, 1 Gb/s, and 10 Gb/s speeds.

– Dual 10GBASE-T based on Intel® X540
– x8 PCI Express® 2.1 interface to the backplane
– Highly integrated single-chip solution
– RJ-45 connectors for copper cabling
– Rugged design, optionally with P6 for improved mechanical stability
– Version for extended temp. range E2 (-40°C up to +85°C)