Archives

October 10, 2017

CPCIserial-CAN/402-4-FD

CompactPCI® Serial Board with 4 CAN FD Interfaces, optional IRIG-B Input

CompactPCI Serial Board with Intel® FPGA for 4x CAN FD via DSUB25
– High-Speed CAN FD interfaces acc. to ISO 11898-2, up to 8 Mbit/s
– Bus mastering and local data management by FPGA (esdACC)
– PICMG® CPCI-S.0 standard supporting high speed PCI Express® interface lines
– Selectable CAN termination on board
– Supports MSI (Message Signaled Interrupts)
– All I/O signals via 25-pin DSUB in the front panel
– Optional IRIG-B inputs

Wide Range of OS Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries
– ISO 16845:2004 certified esd Advanced CAN Conrtoller (esdACC)
– High resolution hardware timestamps

Advanced CAN Controller
– esd Advanced CAN Controller (esdACC) offers highest CAN performance and diagnostic

Customization on Request
– Extended temperature range: -40° C … +75° C
– Error simulation support
– All signals via Rear I/O (P3)

September 24, 2016

SN5-TOMBAK

The SN5-TOMBAK is a peripheral slot card for CompactPCI® Serial systems. The board is equipped with a dual port 10Gbps Ethernet controller. Both ports are available via SFP+ front bezel connector cages, suitable for attachment of either optical cables via SFP+ transceivers or SFP+ twinaxial copper cables. The Intel® 82599ES Ethernet NIC is known for its high performance, low latency, reliability, and flexibility, and is backward compatible to 1Gbps and 100Mbps speeds.

The SN5-TOMBAK is based on PCI Express® 2.1 (up to 5GT/s) and supports x1, x2, x4 and x8 link widths. For optimum performance, the board should be installed in a CompactPCI® Serial fat pipe slot. The SN5-TOMBAK is well suited for high performance industrial networking applications. Drivers are available for all major operation systems.

September 24, 2016

SN3-GONG

The SN3-GONG is a peripheral slot card for CompactPCI® Serial systems. The board is equipped with an Intel® X540 10GBASE-T Ethernet controller, and two RJ45 front panel jacks for attachment of Cat 6 or Cat 6A cables up to 100m length. The ability to auto-negotiate between 100Mbps, 1Gbps, and 10Gbps speeds provides the backwards compatibility for a smooth transition and easy migration to 10GbE. The X540 is based on PCI Express® 2.1 (up to 5GT/s) and supports x1, x2, x4 and x8 link widths. For optimum performance, the SN3-GONG should be installed in a CompactPCI® Serial fat pipe slot.

The SN3-GONG is well suited for high performance industrial networking applications. Drivers are available for all major operation systems.