Archives

Quad Fiber Optics Ethernet Board

The G211F is a rugged 3U CompactPCI Serial peripheral board. It offers the possibility to implement four optical fiber Ethernet interfaces. The board is equipped with a cage for connection of four SFP transceivers. The cage hosts the optical adapter. The cables are connected to the adapter module. MEN offers an optical transceiver with LC-Duplex connectors as an accessory.

The G211F can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system.

1000BASE-SX Channels

All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1 Gbit/s if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface.

Rugged Environments

The G211F is designed for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments.

Quad Gigabit Ethernet Board

The G211 quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board. It can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system.

Flexible Front Connectors

It provides four Gigabit Ethernet interfaces at the front panel which can be accessed either on four RJ45 or four A-coded M12 connectors making it especially suited for applications in harsh environments.

All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1Gbit/s, even if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface.

Rugged Environments

The G211 is designed for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments.

CompactPCI® Serial (PCIe®) Board with 2 CAN FD Interfaces

CompactPCI Serial Board with FPGA for 2x CAN FD via DSUB9 Connectors
– High-speed CAN FD interfaces acc. to ISO 11898-2, bit rate up to 8 Mbit/s
– Bus mastering and local data management by FPGA (esdACC)
– PICMG® CPCI-S.0 standard supporting high-speed PCI Express® interface lines
– Selectable CAN termination on board and cut-out in the front panel for jumper view
– Supports MSI (Message Signaled Interrupts)

Wide Range of OS Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries
– ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology
– High resolution hardware timestamps

Advanced CAN Controller
– esd ACC technology offers highest CAN performance and diagnostic

Customization on Request
– Ext. temperature range: -40° C … +75° C
– Error simulation support
– All signals via Rear I/O (P3)