Archives

6U 4HP CPCI and VME 10GbE Switch, PICMG 2.16 and VITA 31.1 compliant

Flexi-Switch – State-of-the-art CompactPCI/VME PICMG 2.16 VITA 31.1 Switch

The new Kontron CP6930 is a 6U hot-swappable CPCI and VITA 31 switch with 26 GbE ports and 6 high performance uplinks (10 GbE). The CP6930 provides built-in switching capacity for CompactPCI and VITA 31.1 installations at an unsurpassed price/performance ratio by implementing the latest switching technology. It applies to VoIP installations such as Call Servers, MediaGateways and Trunking Gateways in wireline and wireless networks, as well as VoIP systems in enterprise networks with high demands on performance.

– Leading edge technology based on BCM56626 chip set
– 6x 10GbE via SFP+, 2x 1GbE via SFP
– 24x Gigabit Ethernet Ports according PICMG2.16 / VITA31.1
– Non-blocking layer 2 & 3 switching & routing, IPv6 compliant
– Fully managed
– DHCP Server and Boot media support
– Hot swap, IPMI
– Comprehensive firmware package

CPCI/PICMG 2.16 4th Generation Intel® Core Processor based System/Peripheral CPU

Highest Performance, Best Technology

The CP6005-SA 6U CompactPCI processor board available with Fourth Generation Intel® Core Quad Core processors meets the outstanding computing and graphics performance requirements at lowest power budgets.

The powerful processors enable virtualization and multithreading applications to run in full 64-bit mode using Enhanced Intel® Virtualization, Intel® HD Graphics, and Intel® Turbo Boost Technology.
Designed for bandwidth-intensive applications, the CP6005-SA provides hot swap, IPMI (Intelligent Platform Management Interface), TPM (Trusted Platform Module 1.2) support, and meets the highest standards for the management and security of high-availability applications.
This makes this board exceptionally attractive to multiple markets, including highly sensitive, security-relevant telecom and datacom applications and, thanks to its robust construction, is also ideal for image-processing systems in medical and defense systems, among many other vertical segments.

– 4HP, single slot processor board with passive cooling
– Scalable processor speed, 4th Generation Intel® Core Processor based
– Up to 16GB DDR3L 1600 MHz memory via two SO-DIMM sockets
– 5x GigEthernet Interfaces via PCIExpress
– Latest IO technology with SATA Gen 3, RAID, SSD
– XMC/PMC + onboard HDD + SSD Flash configuration possible
– Rear I/O supporting PICMG 2.16
– CP6005X-SA with 2x 10GbE and PCIe Gen3 x4 on backplane based on PICMG2.20 specification

CPCI/PICMG 2.16 Third Generation Intel® Core Processor based System/Peripheral CPU with 10G Ethernet & PCI Express backplane support

Highest Performance, Best Technology, 10GbE on backplane

Based on the successful CP6004-SA 6U CompactPCI processor board available with Third Generation Intel® Core Quad Core processors, the CP6004X-SA is based on existing standards and provides two additional 10Gigabit/sec Ethernet ports and PCIe 2.0 x4 to the backplane based on the PICMG2.20 specification.
This CP6004X-SA design is made for highest data throughput, where performance and ruggedization on a scaleable platform is required.

The quad core processor enables virtualization and multithreading applications to run in full 64-bit mode using Enhanced Intel® Virtualization, Intel® HD Graphics, and Intel® Turbo Boost Technology.
The CP6004X-SA provides hot swap, IPMI (Intelligent Platform Management Interface), optional TPM (Trusted Platform Module 1.2) support, and meets the highest standards for the management and security of high-availability applications.
This makes this board exceptionally attractive to multiple markets, including highly sensitive, security-relevant telecom and datacom applications and, thanks to its robust construction, is also ideal for image-processing systems in medical and defense systems, among many other vertical segments.

Backplane and system solutions with highest data throughput will also be available at Kontron.

– 4HP, single slot processor board with passive cooling
– Dual 10 Gigabit Ethernet & PCI Express on backplane based on PICMG2.20
– 3rd Generation Intel® Core i7-3615QE Processor based
– Up to 16GB DDR3 1600 MHz memory via two SO-DIMM sockets
– 5x GigEthernet Interfaces via PCIExpress
– Latest IO technology with SATA 6Gb/s, RAID, SSD
– XMC + onboard HDD + SSD Flash configuration possible
– Rear I/O supporting PICMG 2.16