Archives

CompactPCI® Board with 4 CAN or 4 CAN FD Interfaces

CompactPCI Board with FPGA for 4x CAN FD via DSUB25
– 4 CAN FD interfaces according to ISO 11898-2
– Bus mastering and local data management by FPGA
– PCI bus conform to PCI Local Bus Specification 3.0
– Selectable CAN termination on board
– Supports MSI (Message Signaled Interrupts)
– Optional extended temperature range: -40° C … +85° C

Wide Range of Operating System Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries are available
– ISO 16845:2004 certified esd Advanced CAN Controller (esdACC)
– High resolution hardware timestamps

Modern Transceiver Technology
– esd Advanced CAN Controller (esdACC) offers highest CAN performance and diagnostic

Customization on Request
– IRIG-B input
– Error simulation support
– All signals via Rear I/O (P3)
– 2x CAN FD via DSUB9

Proven and reliable, RS-232 stays a popular point-to-point low power communication interface.
The CUE-BALLAD is a peripheral slot card for CompactPCI® systems, equipped with four front panel RS-232 ports, available through RJ45 jacks. Isolation barrier transceivers are provided for optimum noise and EMC immunity up to 460kbps data rate, as required for industrial use and operation in harsh environments.

The CUE-BALLAD is based on an octal PCI Express® to UART bridge. The 950-style UARTs are compatible with many asynchronous serial applications and protocols. While four ports are available via RJ45 front panel jacks across isolated transceivers conforming to TIA/EIA-232-E and ITU-T V.28 specifications, another four UART channels are wired to the CompactPCI® backplane connector J2, as TTL level signals for rear I/O usage up to 15Mbps data rate per port.

Proven and reliable, RS-485 (EIA/TIA-485) stays a popular fieldbus communication interface, due to simple installation via low cost twisted pair copper cables, up to 1200m length.
The CUD-TWIST is a peripheral slot card for CompactPCI® systems, equipped with four isolated front panel RS-485 ports. High speed RS-485 balanced line transceivers with internal 5kV isolation barrier provide for optimum noise and EMC immunity.

The CUD-TWIST is equipped with an octal PCI Express® to UART bridge. The 950-style UARTs are compatible with many asynchronous serial applications and protocols. Four isolated EIA/TIA-485 transceivers are wired to RJ45 front panel jacks, individually configurable for full-duplex operation (4+1 wire cable) or half-duplex (2+1 wire cable), either point-to-point or multipoint applications. Another four UART channels are wired to the CompactPCI® backplane connector J2 for rear I/O usage.