Archives

The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board. 4 green LEDs on the front panel display the voltages on the backplane and 2 yellow LEDs display the over temperature status and recording activity of thetemperature values. To monitor and record the board temperature, there are 2 temperature sensors located on the top and on the bottom of the load board. The recorded temperature values can be read out via serial USB interface located on the front panel.

Standalone Power-BP 3U 8HP to
connect CPCI Serial power supplies
to compactPCI Serial-BPs.
The connection is made via cables.

“CompactPCI Serial Card with Xilinx Zynq UltraScale+ ZU15, 3U form factor”

The Trenz Electronic TEC0850 board is a CompactPCI Serial card (3U form factor) integrating a Xilinx Zynq UltraScale+ MPSoC ZU15EG, one DDR4 SDRAM SODIMM socket with 64bit wide data bus, 128 MByte Flash memory for configuration and operation, 24 Gigabit transceivers on PL side and 4 on PS side, powerful switch-mode power supplies for all onboard voltages, USB2 and USB3 FIFO bridges and a large number of configurable I/Os available on the CompactPCI Serial backplane connectors.