Archives

SY AM1/526 – Six Slot MicroTCA® Cube Development System

SY AM1/526 – Six Slot MicroTCA® Cube Development System with Intel® Processor based AdvancedMC™ Module is available for lab and desktop use.

Supplied with built in AC power supply, backplane and cooling fans for ease of use
Backplane configured for 3x Mid-size and 2x Full-size modules plus a MicroTCA Carrier Hub (MCH)
Option for an Intel® processor based AdvancedMC™ module to suit application requirements
Board support packages available for popular operating systems
Optional mass storage module
Additional slots for extra processor or application specific modules

VT898

The VT895 is a 6U μTCA chassis that provides 12 AMC full-size, double module slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4.

The VT895 has full redundancy, including redundant MCH, Power Modules, as well as redundant Cooling Units (CU) for high availability. The cooling configuration is from bottom-to-top. There is an option for redundant/non-redundant clock per μTCA specification. It provides CLK1, CLK2, and CLK3 to each slot. The CLK3 option can be configured for the Fabric clock as well as Telecom clock.

An option is available for Port 2 and 3 to be directly connected among the adjacent AMCs or to the fabric B (AMC.3 SATA/SAS switch option on the MCH). The chassis routes ports 12-15 and 17-20 to each slot.

The VT895 has a rear Telco Alarm as well as Redundant FRU information devices and carrier locators. A JTAG Switch Module (JSM) slot routes to the JTAG port of each AMC.

VT895

The VT895 is a 6U μTCA chassis that provides 12 AMC full-size, double module slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4.

The VT895 has full redundancy, including redundant MCH, Power Modules, as well as redundant Cooling Units (CU) for high availability. The cooling configuration is from bottom-to-top. There is an option for redundant/non-redundant clock per μTCA specification. It provides CLK1, CLK2, and CLK3 to each slot. The CLK3 option can be configured for the Fabric clock as well as Telecom clock.

An option is available for Port 2 and 3 to be directly connected among the adjacent AMCs or to the fabric B (AMC.3 SATA/SAS switch option on the MCH). The chassis routes ports 12-15 and 17-20 to each slot.

The VT895 has a rear Telco Alarm as well as Redundant FRU information devices and carrier locators. A JTAG Switch Module (JSM) slot routes to the JTAG port of each AMC.