3U CompactPCI Serial Backplane with 8 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 7x CompactPCI S.0 peripheral slots, without connectors for RTMs (RearTransition Modules), Ethernet routed as full mesh on the backplane
3U CompactPCI Serial Backplane with 8 CompactPCI S.0 slots, system slot left, with rear IO : 1x CompactPCI S.0 CPU slot, 7x CompactPCI S.0 peripheral slots, with connectors for RTMs (RearTransition Modules) in slots 2 to 8, Ethernet routed as full mesh on the backplane
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board. 4 green LEDs on the front panel display the voltages on the backplane and 2 yellow LEDs display the over temperature status and recording activity of thetemperature values. To monitor and record the board temperature, there are 2 temperature sensors located on the top and on the bottom of the load board. The recorded temperature values can be read out via serial USB interface located on the front panel.
