Archives

Extruded aluminum solution, industrial
19″ rackmount with rear IO
7U, 9U, 10U, 11U, 13U heights
7U – 405mm deep, 9U/10U – 290.5mm deep
Up to 21 slots (with bridges) cPCI/2.16
Vertical mount with pluggable (or fixed) power supplies
Maximum installation with minimal space requirements
Slots at the front for 160 mm and at the rear for 80 mm boards
Hot swap-compatible power supply units
EMC and ESD protection
Fully assembled, wired and tested
Integral cooling from left to right
Complies with VITA-1, VITA-1.1, IEC 60 297-3 and IEEE 1101.1/1101.10/1101.11

Slimline sheet metal solution, economical design
19″ rackmount with rear IO
1U-4U heights, 300mm deep
2-8 slots cPCI/2.16
Horizontal mount with pluggable (or fixed) power supplies
Maximum installation with minimal space requirements
2/4/6/8 slots at the front for 160 mm and at the rear for 80 mm boards
Hot swap-compatible power supply units
EMC and ESD protection
Fully assembled, wired and tested
Integral cooling from left to right
Complies with CompactPCI spec. 2.0 and 2.1, IEC 60 297-3 and IEEE 1101.1/1101.10/1101.11

With a redundant shelf manager integrated with the switch fabric, the feature saves the two slots that are usually dedicated switch fabric slots in the ATCA Chassis. The two extra slots are utilized as standard payload slots, allowing more boards/performance in significantly less space. The PX0600 can optionally be configured for full HA redundancy across all FRUs, including power modules, cooling units, shelf managers/telco alarm, and switches. If AC power is not required, 5U chassis option is available.