Archives

Features at a glance:
– 3 U / 30 HP CompactPCI system platform
Card rack acc. to IEEE 1101.1, 1101.10 / 11 and IEC 60297-3-101, -102, -103
– Completely assembled and wired
– CompactPCI card rack, cover / bottom plate perforated, with rear wall, galvanized sheet steel, with IEEE guide rails and ESD clip mounted at the bottom
– CompactPCI backplane, 3 U, 4 slots, 32-bit / 33 MHz, system slot on right side, with ATX connector
– ATX power supply unit with wide range input 100 – 240 VAC, (3,3 V / 16 A, 5 V / 12 A, 12 V / 10 A, -12 V / 0,8 A) active PFC, with fan and switch, with cable harness for connection to backplane, incl. 3U / 10HP front panel

Dimensions
B: 208.4 mm
H: 132.5 mm
D: 237.5 mm

Order Number:
LMH0000111

Features:
– Conforms to PICMG specification 2.0 R3.0
– Backplane come standard with a P47 power connector
– No additional wiring is required
– Designed for use with 8 HP-wide power supply
– Extremely flat design (version without rear I/O) is ideally suited for systems intended for wall mounting
– Virtually zero crosstalk

Specifications:
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, without rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, with rear I/O
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, with rear I/O
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, with rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 64 bit, 66Mhz, 3.3V I/O, 1 to 5 slots
– 3U, 64 bit, 33Mhz, 3.3V I/O, 1 to 8 slots
– 3U, 64 bit, 33Mhz, 5V I/O, 1 to 8 slots

Features;
– Conforms to PICMG specification 2.0 R3.0
– Backplane comes standard with two power supply connectors, DIN 41612 Type M connector and ATX connector
– Screw connections for all voltages are available as an option
– V (I/O) voltage can be changed in a simple manner with this version
– Connectors for external connection of the JTAG bus and IPMB bus come standard
– Virtually zero crosstalk
– Create a redundant system by adding a second power supply unit with our power backplane Variant L1

Specifications:
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, without rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, with rear I/O
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, with rear I/O
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, with rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 1 to 5 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 3.3V I/O, 1 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 5V I/O, 1 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 64 bit, 66Mhz, 3.3V I/O, 1 to 5 slots
– 3U, 64 bit, 33Mhz, 3.3V I/O, 1 to 8 slots
– 3U, 64 bit, 33Mhz, 5V I/O, 1 to 8 slots