Archives

CPCIserial-CAN/402-2-FD

CompactPCI® Serial (PCIe®) Board with 2 CAN FD Interfaces

CompactPCI Serial Board with Altera® FPGA for 2x CAN FD via DSUB9 Connectors
– High-speed CAN FD interfaces acc. to ISO 11898-2, bit rate up to 5 Mbit/s
– Bus mastering and local data management by FPGA (esdACC)
– PICMG® CPCI-S.0 standard supporting high-speed PCI Express® interface lines
– Selectable CAN termination on board and cut-out in the front panel for jumper view
– Supports MSI (Message Signaled Interrupts)

Wide Range of OS Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries
– ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology
– High resolution hardware timestamps

Advanced CAN Controller
– esd ACC technology offers highest CAN performance and diagnostic

CPCIserial-CAN/402-4-FD

CompactPCI® Serial Board with 4 CAN FD Interfaces

CompactPCI Serial Board with Altera® FPGA for 4x CAN FD via DSUB25
– High-Speed CAN FD interfaces acc. to ISO 11898-2, up to 5 Mbit/s
– Bus mastering and local data management by FPGA (esdACC)
– PICMG® CPCI-S.0 standard supporting high speed PCI Express® interface lines
– Selectable CAN termination on board
– Supports MSI (Message Signaled Interrupts)
– All I/O signals via 25-pin DSUB in the front panel

Wide Range of OS Support and Advanced CAN Diagnostic
– Software drivers for Windows® and Linux® included free of charge
– Optional CAN layer 2 software drivers for real-time operating systems
– CANopen®, J1939 and ARINC 825 protocol libraries
– ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology
– High resolution hardware timestamps

Customization on Request
– Extended temperature range: -40° C … +75° C
– IRIG-B input
– Error simulation support
– All signals via Rear I/O (P3)
– 2x CAN FD via DSUB9

SN5-TOMBAK

The SN5-TOMBAK is a peripheral slot card for CompactPCI® Serial systems. The board is equipped with a dual port 10Gbps Ethernet controller. Both ports are available via SFP+ front bezel connector cages, suitable for attachment of either optical cables via SFP+ transceivers or SFP+ twinaxial copper cables. The Intel® 82599ES Ethernet NIC is known for its high performance, low latency, reliability, and flexibility, and is backward compatible to 1Gbps and 100Mbps speeds.

The SN5-TOMBAK is based on PCI Express® 2.1 (up to 5GT/s) and supports x1, x2, x4 and x8 link widths. For optimum performance, the board should be installed in a CompactPCI® Serial fat pipe slot. The SN5-TOMBAK is well suited for high performance industrial networking applications. Drivers are available for all major operation systems.