Archives

Features at a glance:
– 1U 84 HP cPCI chassis with rear I/O, for horizontal installation of 6U cards
– Card rack according to IEEE 1101.1, 1101.10/11, IEC 60297-3-101, -102, -103
– CPCI backplane, 6 + 3 U, 2 slot, 5V
– 250W cPCI power supply
– Cooled by 4 fans (airflow left to right)

– cPCI card rack: painted black outside (RAL 9005), with IEEE card guides and ESD clip mounted on the right side
– cPCI backplane: 6 = 3U, 2 slot, 64bit/33Mhz, V I/O=5V, system slot left, with rear I/O and P47 connector
– cPCI power supply, 250 W, wide range input 90-264 VAC, 3.3V/33A, 5V/33A, 12V/5.5A, -12V/1A, with PFC, with P47 connector, front panel
– Power supply connector with switch, fuse and filter
– Partial front panel 8 HP/3U with EMC gasket on both sides, with cut-out for power supply connector
– 4 DC fans, 40 x 40 x 28mm, 11.3 CFM/fan, 37 db(A)

Dimensions:
W: 482.6 mm
H: 43.3 mm
D: 280.6 mm

Order number:
LMH0000190

Intelligent CompactPCI^® Board with 2 PROFIBUS-DP^® Slave Interfaces

Features:
– Intelligent CompactPCI board in 3U format
– 2 PROFIBUS-DP Slave interfaces, physical layer RS-485
– AMCC PowerPC^TM 405GPr, 266 MHz
– PROFIBUS controller SPC3
– PCI bus according to PCI Local Bus Specification 2.2
– A software driver is available for QNX^®

16 Digital Inputs and 16 Digital Outputs

CompactPCI® Interface with Digital Inputs and Outputs
– 16 inputs 24 V
– 16 outputs 24 V, 250 mA
– All inputs and outputs electrically isolated

Outputs with Short Circuit and Overload Protection
– Error detection signal
– USER LED for debugging or user-specific status signalling

Individual Interrupts on each Input Channel
– Flexibly configurable for rising or falling edges, and for the error signals of the outputs

Customization on Request
– Other division of I/Os (e.g. more Inputs less Outputs)
– Outputs designed for higher current.
– Inputs with other switching thresholds.