Archives

July 14, 2014

3U CompactPCI Quad-Core Intel® Atom Processor Blade: cPCI-3620

The ADLINK cPCI-3620 Series is a 3U CompactPCI® processor blade featuring a quad-core 4th generation Intel® Atom SOC and soldered DDR3L-1333 ECC memory up to 4GB.

Available in single-slot (4HP) or dual-slot (8HP) width form factors, the cPCI-3620 Series utilizes various daughter boards to provide a broad range of I/O functionality. Front panel I/O on the single-slot (4HP) version includes 1x USB 3.0, 2x RJ-45 GbE and 1x VGA port (common to all versions). Front panel I/O on the dual-slot (8HP) version includes additional 2x USB 2.0, 1x COM, 1x PS/2 KB/MS and Line-in/Line-out on the cPCI-3620D or additional 2x GbE via MIL-STD M12 connectors and 1x COM on the cPCI-3620T. Another dual-slot option is the cPCI-3620S with an additional XMC site on layer 2. There is also a single-slot option that provides LED indicators only with no I/O on the front panel.

Graphics support is integrated on the SOC. Storage options include an onboard 32GB SSD (optional) and 2.5″ SATA drive on layer 2 riser card (cPCI-3620D/T). One optional PCI 32-bit/66 MHz PCIe x1 XMC site is available on the dual-slot cPCI-3620S version.

Rear I/O signals to J2 include 2x GbE, 1x VGA, 1x USB 2.0, 2x COM, 1x SATA 3 Gb/s, providing for expansion with an optional Rear Transition Module (RTM).

The cPCI-3620 is an ideal solution for transportation, military, factory automation and other industrial applications that require optimal computing performance for data transfer with lower power consumption. The ADLINK cPCI-3620 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and features ADLINK’s Smart Embedded Management Agent (SEMA) for system health monitoring.

July 8, 2014

CPCI-PN-DEV

PROFINET® IO /CompactPCI® Interface

Linking PROFINET IO and CompactPCI
– Fast and reliable PROFINET IO interface for CompactPCI systems with data buffering
– CompactPCI-PLC link, e.g. to SIEMENS S7-300 or S7-400
– Cost effective: 4 channels onboard

Design with Established Siemens ERTEC400
– PROFINET IO interfaces via RJ45 sockets in the front panel
– CompactPCI Bus according to PIC-MG® 2.0 R2.1

High-Performance PROFINET IO Connection
– Large process image
– 4 PROFINET IO interfaces onboard for flexible wiring
– PCI bus master capability

July 8, 2014

NcPCI-PMC

NcPCI-PMC

The NCPCI-PMC is a carrier for PCI Mezzanine Cards (PMC) in 6U CompactPCI form-factor. Unlike the traditional PMC carriers, the NCPCI-PMC is well suited for running on telecommunication platforms.

The board offers the H.110 bus (PICMG2.5) allowing TDM data from and to the two PMC sites to be distributed among different peripheral boards, such as line interfaces and DSP processing boards, using this standardized bus. Due to the fact that the power consumption of PPMCs (Processor PMCs) is higher than traditional PMCs, the NCPCI-PMC incorporates a special power supply circuitry. Thus the NCPCI-PMC is able to support PPMC modules with a power consumption up to 30W in total for both slots.

PCI Interface and Compliance
– cPCI: Intel 21555,PCI-PCI bridge (cPCI bus->internal PCI bus 1), 64 Bit / 66MHz, hot swapable

internal PCI bus:
– 64 bit/66 MHz PCI bus, which connects the i21555 PCI to PCI bridge to the 2 PMC slots, implemented according to IEEE P1386.1 / draft 2.4a

internal SCSA:
– 2 internal SCSA interfaces implemented, one each for every PMC I/O connector

I/O
– H.110: 32 bis H.110 interface implemented according to PICMG2.5 R1.0