Archives

CPC506 is a PICMG 2.30 “CompactPCI Plus” compliant 3U module based on Intel Сore 2 Duo CPUs (from long term manufacturing program) operating at up to 2.2 GHz with 4 MB level 2 cache, featuring
800 MHz system bus and 965GME/ICH8M chipset. The processor executes up to 8 floating point operations per clock cycle and can address up to 4 GB of soldered DDR2 system memory in 64bit mode.
An increased heatsink for CPU and chipset cooling allows efficient heat dissipation within wide ambient air temperature range.
CPC506 is PICMG 2.30 “CompactPCI Plus” compliant and allows to use 32bit PCI bus together with intermodule communication for highspeed data exchange: two Gigabit Ethernet channels, four x1 PCI Express lanes, 4 USB channels.
The graphics controller of Intel 965GME supports output of two independent video streams to two DVID interfaces (8HP modification) or to standard VGA interface.
The firmware of CPC506 supports booting from LAN, from SD cards, from soldered 4 GB flash memory disk, or HDDs, installed on CompactPCI Plus carrier (KIC550) with SATA support, or from drives located on MIC584 mezzanine module. The MIC584 mezzanine module supports SATA II interface with option to mount 1.8″ SATA disk drive, SATA DOM solidstate modules and also offers six COM ports, two USB 2.0, PS/2 and audio interfaces.
CPC506 supports Linux, QNX and Windows XP Embedded operating systems.

Features:
Intel Core 2 Duo and Core 2 Solo processors (up to 2.2 GHz, 533 or 800 MHz FSB)
Up to 4 GB soldered DDR2 SDRAM
VGA graphics, resolution up to 2048×1536
Dual DVI-D interface, up to 1600х1200 (8HP and 12HP versions)
Intermodule communication (PICMG 2.30): 32-bit PCI bus, 4 x1 PCI Express, 2 SATA II, 4 USB 2.0
Two Gigabit Ethernet ports switchable between front panel and backplane
Soldered 4 GB NAND Flash with IDE interface
SD card slot with USB 2.0 interface
Increased heatsink versions for passive cooling
MIC584 mezzanine module: 1 SATA II, 6 RS-232/485, 2 USB, PS/2
Protective coating (optional)
Operating temperature range: -40…+85°С or 0…+70°C
Linux, QNX, and Windows XP Embedded support

Overview
CPC501 is a high performance 6U CompactPCI CPU card designed for various applications such as telecom, factory automation, transportation, aerospace.
The board is based on Intel® Pentium® M processor up to 1.8 GHz and supports up to 1Gb of DDR SDRAM with ECC.
Intel 855GME/ICH4 chipset incorporates a lot of functions, lowering cost and providing high reliability.
CPC501 has 2 Gigabit Ethernet ports, which can be flexibly configured for front or rear panel, or PICMG 2.16 backplane and one Fast Ethernet port.
The board is fully compatible with PICMG 2.16 specification, thus providing capability to build robust redundant systems.
Hot swap support, hardware monitor and watchdog timer makes CPC501 suitable for mission critical applications.
32 MB solid-state disk is soldered onboard, thus providing non-volatile storage for system configurations without removable disks.
CPC501 can be ordered with PMC support (CPC501-01) or with 2.5″ HDD direct mounting feature (CPC501-02).
There are RS-485 COM-ports for connection to remote equipment.
The board is produced in two versions – for industrial temperature range (-40°C to +85°C) and for commercial temperature range (0°C to +70°C).

Features
-Intel® Pentium® M processor up to 1.8 GHz
-Two Gigabit and one Fast Ethernet ports
-PICMG 2.16 and PICMG2.1 compliant
-Integrated VGA graphics
-Onboard PMC or 2.5″ HDD
-Flash disk soldered onboard
-System and peripheral slot compliance
-Wide range of mezzanine and rear I/O modules
-Operating temperature:
0°C to +70°C – commercial
-40°C to +85°C – industrial

Features:
-Intel Core i7 2nd generation 2 cores (2.2 GHz and 1.5 GHz) / 4 cores (2.1 GHz)
-DDR3 SDRAM 1333 MHz with ECC, up to 8, GB, dual channel, soldered
-XMC/PMC expansion modules support (x8 PCI_E GEN2 + 64_bit / 133 MHz PCI_X)
-4×Gigabit Ethernet controllers (two ports switchable between P16 XMC connector and backplane, two ports available at the front panel)
-10×USB 2.0 ports with HS, FS and LS support four on front panel, four via RIO, two on P16 XMC)
-4×SATA II ports (one for 1.8″ HDD, one at P16 XMC, two via RIO)
-2×Displayport interfaces (one on front panel, one via RIO)
–40…+85°C/ 0…+70°C
-Windows XP Embedded, Linux 2.6, QNX 4.25, 6.4
-MTBF 100 000

CPC503 6U CompactPCI CPU module is an embedded computer on x86 platform
for use in server or client systems for a wide range of applications. CPC503 is based
on 2-nd generation Intel Core i7 (2/4 cores) processors operating at frequencies
from 1.5 to 2.2 GHz and on QM67 Peripheral Controller Hub.
Up to 8 GB of DDR3 SDRAM memory with ECC operating at 1333 MHz is soldered
onboard the CPC503.
CPC503 graphics capabilities include VGA, Displayport, DVI, and LVDS interfaces.
Four Gigabit Ethernet ports are used for networking.
Interface set of CPC503 also includes 12 USB 2.0 ports, four SATA channels, audio
interface and standard J1-J5 CompactPCI connectors at the rear edge of the board.
Fastwel CPC503 supports one XMC/PMC expansion module mounted onboard and
specially designed Fastwel RIO587 rear I/O module. CPC503 provides one 64-bit 66
MHz CompactPCI interface with hot swap capability. The module interfaces with
CompactPCI bus via the built-in PCI-E <-> PCI bridge, this allows using CPC503
either as master system controller or as a slave device in one PCI bus segment.
One of the features of CPC503 is support for PICMG CompactPCI Packet Switching
Backplane Specification version 2.16. Being installed on a backplane supporting the
packet switching mode, CPC503 can communicate with peripheral devices or with
the system master board supporting this mode via two Gigabit Ethernet ports.
The components of CPC503 are carefully selected according to the criteria of applicability
in embedded systems and long-term availability on the market. This makes
this module an ideal device, based on which the systems with long life cycle can be
built.
CPC503 is compatible with Windows 7, QNX 6.5.0, VxWorks 6.8 (on request), and
Linux® 2.6 operating systems.