Archives

The CB3-TONE is a CompacPCI® peripheral card, equipped with a PCI Express® to USB 3.0 quad-port controller. Four USB 3.0 receptacles are available via the front panel for attachment of external USB 3.0 and USB 2.0 compliant devices. Electronic power switches are provided, for up to +5V/1.5A load at any USB connector. The USB controller supports all data transfer protocols on any connector, SuperSpeed (USB 3.0 xHCI) as well as high-speed, full-speed, and low-speed. The CB3-TONE is provided with a PCI® to PCI Express® bridge, as interface between the USB controller and the CompacPCI® backplane.
The CB3-TONE is equipped with the TI TUSB7340 single chip PCI Express® to USB 3.0 bridge. The xHCI (SuperSpeed) compliant host controller supports up to four downstream ports. Each downstream port may be independently enabled and has individual power control and overcurrent detection.

SuperSpeed USB 3.0 offers ten times the data speed of USB 2.0 (5 Gbit/s compared to 480 Mbit/s). The bandwidth of the xHCI controller is shared over all TUSB7340 downstream ports. Texas Instruments provides xHCI compliant Windows® drivers for download.

CPC510 is a highly integrated 3U CPCI Serial solution for using in real time systems, manufacturing control, high-speed collection and processing of data.

Intel IvyBridge processors (2/4 Cores, up to 2,5 GHz)
Up to 8 GB soldered, dual_channel DDR3 SDRAM with ECC
2 DisplayPort up to 2560х1600@60Hz at the front panel, 1 DisplayPort up to 2560х1600@60Hz is routed to the mezzanine module
2xGigabit Ethernet ports (front panel)
2xUSB 2.0 (front panel)
Intermodule communication (PICMG CPCI_S.0 CompactPCI® Serial): two x8 FatPipe PCI_E 2.0; four x4 PCI_E 2.0; 8 USB2.0 or 4 USB2.0 + 4 USB3.0; 2 SATA II and 2 SATA III
SD card slot with USB 2.0 interface
Increased heatsink versions for passive cooling
Protective coating (optional)
-40…+85°С or 0…+70°C (IEC 68-2-14-84)
Windows 7 Embedded, Linux 2.6, QNX 6.5

Low profile 120 W DC/DC Converter for CompactPCI^®

CompactPCI Power Supply
– Input: 24 V / 120 W
– Output: 3.3 V / 15 A and 5.0 V / 10 A
– DIN 41612 type H connector

CE – Compliance
– High noise immunity (industry)
– Low emission (class B)

Small Form Factor
– Only one slot (4 HP) wide
– Passive cooling