Archives

The PC6-TANGO is a low power 4HP/3U CompactPCI® PlusIO CPU board, equipped with an Intel® Atom® 39xx-series System-on-Chip processor (Apollo Lake).
The PC6-TANGO front panel is provided with two Gigabit Ethernet jacks (option M12-X), two USB 3.0 receptacles, two DisplayPort connectors, and optionally a Micro SD Card slot.
The PC6-TANGO is equipped with 8GB directly soldered DDR3L ECC RAM, and a CFast™ card socket as on-board SSD mass storage solution.
Optionally available is an on-board 64GByte e•MMC flash memory chip. Further more, low profile SATA SSD mezzanine modules are available as additional on-board mass storage solution.
The PC6-TANGO backplane connectors comply with the CompactPCI® PlusIO specification, suitable for system expansion with classic CompactPCI® peripheral cards via J1, and in addition a rear I/O module attached to J2, or up to four CompactPCI® Serial cards accessed on a hybrid backplane.

The PC7-FESTIVAL is a rich featured high performance 4HP/3U CompactPCI® PlusIO CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor for demanding applications. For scalability, the PC7-FESTIVAL is also available with a 7th Generation Intel® CoreT processor.

The PC7-FESTIVAL front panel is provided with two RJ45 Gigabit Ethernet jacks, two USB 3.0 Type-A receptacles, and two DisplayPort™ connectors. In addition, a third USB Type-C front panel receptacle i available as an option, usable alternatively as (third) DisplayPort.

The powerful Xeon® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB).

On-board mass-storage solutions are based on low profile mezzanine expansion cards, which can accommodate up to two M.2 style SSD modules (PCIe® Gen3 x4 and/or SATA 6G). Side cards for an 8HP assembly are also available, providing front I/O and M.2 SSDs.

The PC7-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.

The backplane connector J1 allows for up to seven CompactPCI® Classic peripheral cards in a system. The J2 connector complies with the CompactPCI® PlusIO standard for high speed rear I/O (fourfold PCIe®, SATA and USB2), or a hybrid CompactPCI® Serial backplane.

The CN8-REVERB is a peripheral slot card for CompactPCI® systems. The board is
equipped with five independent PCIe® based Gigabit Ethernet controllers, wired to
associated RJ45 front panel jacks.

The Intel® I210-IT Ethernet NICs provide latest networking technology and support
most common industrial data rates 1000BASE-T, 100BASE-TX, 10BASE-T.

The CN8-REVERB combines a PCI® to PCI Express® reverse bridge with a six port
PCI Express® packet switch, for optimum bandwidth usage of the classic
CompactPCI® backplane.

The CN8-REVERB is well suited for various industrial networking applications and
also for PXI™ systems. Drivers are available for all major operation systems.