Archives

[EOL]
The cPCI-6965 Series is a highly integrated 6U CompactPCI® SBC in single slot (4HP) or dual slot (8HP) width form factor. It has been designed to support the Intel® Core 2 Duo and Celeron® M processors in 478-pin Micro-FCPGA. The cPCI-6965 is based on the Mobile Intel® GME965 Express chipset which offers outstanding graphics and I/O bandwidth, asset management capabilities, storage speed and reliability.

The cPCI-6965 supports dual-channel non-ECC 533/667 MHz DDR2 memory with a maximum capacity of up to 4GB, 533/800 MHz Front-Side Bus (FSB), and Mobile Intel® Graphics Media Accelerator X3100 (Intel® GMA X3100). The integrated graphics support dual independent displays through two DVI outputs on the front panel. The cPCI-6965 offers versatile I/O ports such as two Gigabit Ethernet ports, two RS-232/422/485/485+ selectable serial ports, four USB 2.0 ports, PS/2 Keyboard/Mouse, and parallel port on the front panel. Additional I/O can be routed to available Rear Transition Modules (RTM), including USB, VGA, SCSI, Floppy port, Mic-in, Line-out, and SATA. The board also supports one 32- bit/33MHz CompactPCI® interface and a PMC expansion slot.

Storage features of the cPCI-6965 include a pin header and mounting space for an onboard USB NAND flash module, two Serial ATA interfaces with mounting space for a 2.5″ HDD, and CompactFlash socket.

Features
– 3U CompactPCI® single system, seven peripheral slot configuration or dual system, five peripheral slot configuration
– Equipped with single PS/2 form factor 400 W ATX power supply or CompactPCI® redundant power supply (Max. output 500 W)
– Suitable for both rackmount and desktop applications
– Comprehensive EMC shielding
– Optional rear I/O configuration (cPCI 50mm depth RTMs)

[EOL]
The cPCI-6510 Series is a 6U CompactPCI single board computer in single slot width (4HP) form factor supporting 32nm Intel® Core i7 SV, LV, ULV processors with integrated graphics and ECC memory controller onboard. The cPCI-6510 provides up to 8GB of dual channel DDR3-800/1066 ECC memory soldered onboard and implements the Mobile Intel® QM57 Express Chipset to provide a full feature set and optimal performance per watt.

The cPCI-6510 Series provides a 64bit/66MHz CompactPCI bus, up to two PMC sites with 64-bit/133MHz PCI-X bus supporting rear I/O (PIM), and one PCI-Express x8 XMC site (shared with inner PMC site). Featured I/O includes four PCI-Express Gigabit Ethernet ports (two on front panel, two for PICMG 2.16), two USB ports and a CompactFlash socket. DVI-I, COM and additional USB ports are available on the cPCI-6510V version which also provides a SATA connector for an onboard 2.5″ SATA HDD. Optional Rear Transition Modules provide versatile additional I/O including two additional GbE, USB, COM, High Definition Audio, and storage interfaces such as SATA, SCSI, and SAS with RAID support. The cPCI-6510V supports dual independent display via two DVI or one DVI and one VGA when accompanied by the appropriate Rear Transition Module.

For flexibility of use, the cPCI-6510 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as a PCI device. Through hardware switch setting, the cPCI-6510 optionally supports operation in system or peripheral slots as a standalone blade. The cPCI-6510 Series is ideally suited for military, aviation, communication and other industrial applications.