Archives

The XPort1020 is a communications controller targeting high-performance yet low-cost applications. The XPort1020 combines a wide array of supported serial protocols, a broad range of serial interface standards, and a flexible I/O routing structure to pack maximum flexibility into an industry-standard cPCI form factor.

Powered by up to three Freescale MPC8270 (PowerQUICC II) processors, the XPort1020 implements twelve serial communication ports, each providing a EIA-530-A-compliant signal set. Support for HDLC/SDLC, UART, transparent, and BiSync modes, with NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester encoding is also provided. Coupled with software-configurable support for RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114, the XPort1020 provides a wide range of serial options.

For a system designer, the XPort1020 will help drive both cost and power consumption down. Because the PCI bridge is integrated on-chip and the processors are linked via the 60x bus, the XPort1020 draws less power and costs less than conventional designs based on other processors that require a PCI bridge.

The XCalibur4500 is a high-performance 6U CompactPCI single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 4th generation Intel® Core i7 Haswell processor, the XCalibur4500 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.

The XCalibur4500 provides up to 16 GB DDR3L-1600 ECC SDRAM in two separate channels, two PrPMC/XMC slots, and up to 64 GB of NAND flash. The XCalibur4500 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485 through the backplane connectors.

The XCalibur4500 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

The XCalibur4402 is a high-performance, 6U CompactPCI, multiprocessing, single board computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With the 2nd generation Intel® Core i7 processor or 3rd generation Intel® Core i7 processor, the XCalibur4402 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.

The XCalibur4402 provides up to 16 GB of DDR3-1600 ECC SDRAM in two channels, two PrPMC/XMC slots, and up to 128 GB of NAND flash. The XCalibur4402 also supports Gigabit Ethernet, SATA, I²C, USB, PMC I/O, XMC I/O, and DisplayPort graphics out the connectors.

The XCalibur4402 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.