Archives

Available with a choice of PowerPC or Pentium on 6U CompactPCI or PICMG 2.16 boards. Choice of on-board PMCs according to slot availability and requirements. Rear I/O transition modules with PIMs (PMC Interface Modules) for maximum system configurability. Configured for VxWorks, Linux, Windows or Solaris OS with driver support. Compact, 4U (7″) chassis with 6 CompactPCI or PICMG 2.16 slots.

Features:
· 14 slot mixed backplane: two PICMG 2.16 fabric slots, and two PICMG 2.16 system node slots
· Choice of a PowerPC or Pentium Single Board Computer
· Choice of one or two 10/100 or Gigabit Ethernet switches, managed or unmanaged
· Choice of storage solutions in PMC, cPCI form factor
· ACT Technico’s RAIDStor for a 6U Network Attached Storage Development Kit
· 19″ rackmount enclosure, 10U High, 21″ deep
· Two 600W redundant power supplies provided (up to 1800 watts available)
· Hot swap removable fan tray with 274 CFM cooling capacity (350 LFM average airflow)
· 6U module with provisions for 1 floppy drive, 1 hard drive and 1 CD drive
· Configured for VxWorks, Linux, Windows or Solaris OS with driver support

Features
– 3U CompactPCI® backplane with 12 peripheral cand slots and one system slot
– 2 + 1 hot swappable 500 W + 250 W CompactPCI® Power supply (supports three 250 W PSUs)
– Temperature, voltage, and fan monitoring LEDs
– Supports current sharing on +5V, +3.3V, and +12V
– PICMG® 2.11 47-pin power interface
– Hot-swappable cooling fans & filter
– Supports rear I/O backplane with P2 Connectors for cPCI 50mm/80mm depth RTMs

Features
– Dual 3U CompactPCI® Systems, each with five peripheral card slots and one system slot
– 1/1 250 W CompactPCI® Power supplies
– Temperature, voltage, and fan monitoring LEDs
– Supports current sharing on +5 V, +3.3 V, and +12 V
– PICMG® 2.11 47-pin power interface
– Hot-swappable cooling fans & filter
– Supports rear I/O backplane with P2 Connectors for cPCI 50mm/80mm depth RTMs