Archives

Features at a glance
– 3 U / 84 HP CompactPCI system platform with rear I / O
– Card rack acc. to IEEE 1101.1, 1101.10 / 11 and IEC 60297-3-101, -102, -103, EMC
– Completely assembled and wired

– CompactPCI card rack, cover / bottom plate perforated, aluminium, with IEEE guide rails and ESD clip mounted at the bottom
– CompactPCI backplane, 3 U, 8 slots, 32-bit / 33 MHz, system slot right, V (I/O)=5V, with rear I / O, with ATX connector
– Industrial PS2 power supply unit with wide range input 90 – 264 VAC, (3.3 V / 28 A, 5 V / 35 A, 12 V / 22 A, -12 V / 1 A) active PFC, with fan and switch, with cable harness for connection to backplane, incl. front panel 3 U / 32 HP
– 3 x Blanking plate 4 HP / 3 U *
– 1 x Blanking plate 12 HP / 3 U *
– 1 x Blanking plate 48 HP / 3 U *
* with EMC spring

Dimensions
B: 482.6 mm
H: 132.5 mm
D: 280.6 mm

Order number:
LMH0000100

Features at a glance:
– 3 U / 30 HP CompactPCI system platform
Card rack acc. to IEEE 1101.1, 1101.10 / 11 and IEC 60297-3-101, -102, -103
– Completely assembled and wired
– CompactPCI card rack, cover / bottom plate perforated, with rear wall, galvanized sheet steel, with IEEE guide rails and ESD clip mounted at the bottom
– CompactPCI backplane, 3 U, 4 slots, 32-bit / 33 MHz, system slot on right side, with ATX connector
– ATX power supply unit with wide range input 100 – 240 VAC, (3,3 V / 16 A, 5 V / 12 A, 12 V / 10 A, -12 V / 0,8 A) active PFC, with fan and switch, with cable harness for connection to backplane, incl. 3U / 10HP front panel

Dimensions
B: 208.4 mm
H: 132.5 mm
D: 237.5 mm

Order Number:
LMH0000111

Features:
– Conforms to PICMG specification 2.0 R3.0.
– System slot right
– Power supply via screw connections, terminal bars
– Slot pitch 4HP/.8″
– Extremely flat PCI to PCI bridge bridge permits cascaded backplanes without losing any slots
– Rear I/O boards can be inserted in all slots
– Virtually zero crosstalk
– Backplanes with transfer housing permits two or more backplanes to be connected with the plugged-in 64-bit PCI to PCI bridge to create a backplane with more than 8 slots.
– The slots into which the bridge is inserted from the rear cannot be used on the user side.

Configurations:
– 3U, 32 bit, 66Mhz, 3.3V I/O, 2 to 5 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 3.3V I/O, 2 to 21 slots, without rear I/O
– 3U, 32 bit, 33Mhz, 5V I/O, 2 to 21 slots, without rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 2 to 5 slots, with rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 2 to 21 slots, with rear I/O
– 3U, 32 bit, 66Mhz, 5V I/O, 2 to 21 slots, with rear I/O
– 3U, 32 bit, 66Mhz, 3.3V I/O, 2 to 5 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 3.3V I/O, 2 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 32 bit, 33Mhz, 5V I/O, 2 to 8 slots, with rear I/O without Geographic Addressing
– 3U, 64 bit, 66Mhz, 3.3 V I/O, 2 to 5 slots, without transfer housing
– 3U, 64 bit, 33Mhz, 3.3 V I/O, 2 to 8 slots, without transfer housing
– 3U, 64 bit, 33Mhz, 5 V I/O, 2 to 8 slots, without transfer housing
– 3U, 64 bit, 33Mhz, 3.3 V I/O, 4 to 8 slots, with transfer housing
– 3U, 64 bit, 33Mhz, 5 V I/O, 4 to 8 slots, with transfer housing