Archives

Features at a glance:
– 1U 84 HP cPCI chassis with rear I/O, for horizontal installation of 6U cards
– Card rack according to IEEE 1101.1, 1101.10/11, IEC 60297-3-101, -102, -103
– CPCI backplane, 6 + 3 U, 2 slot, 5V
– 250W cPCI power supply
– Cooled by 4 fans (airflow left to right)

– cPCI card rack: painted black outside (RAL 9005), with IEEE card guides and ESD clip mounted on the right side
– cPCI backplane: 6 = 3U, 2 slot, 64bit/33Mhz, V I/O=5V, system slot left, with rear I/O and P47 connector
– cPCI power supply, 250 W, wide range input 90-264 VAC, 3.3V/33A, 5V/33A, 12V/5.5A, -12V/1A, with PFC, with P47 connector, front panel
– Power supply connector with switch, fuse and filter
– Partial front panel 8 HP/3U with EMC gasket on both sides, with cut-out for power supply connector
– 4 DC fans, 40 x 40 x 28mm, 11.3 CFM/fan, 37 db(A)

Dimensions:
W: 482.6 mm
H: 43.3 mm
D: 280.6 mm

Order number:
LMH0000190

The cPCIS-6418U Series Subsystem is designed for maximum density and has 8 horizontal slots for 6U cPCI boards with 80mm RTMs. The chassis is 4U in height and standard 19″ rack mount width.

The cPCIS-6418U provides 2+1 hot swappable 500W+250W redundant power supplies with universal AC input. It has a PICMG 2.1 Hot Swap compliant 64-bit 8-slot CompactPCI backplane with PICMG 2.5 H.110 CT Bus (cPCIS-6418U/N110 does not support CT Bus).

A built-in alarm board monitors chassis temperature, voltage and fan status and provides an RS-232 interface on the rear panel.

The cPCIS-6400U/6400X Series subsystems are designed for 6U cPCI boards with 80mm RTMs. The chassis is 4U in height and standard 19″ rack mount width. The cPCIS-6400U provides 2+1 hot swappable 500W+250W redundant power supplies with universal AC input, while the cPCIS-6400X has a built-in 400W AC-input ATX power supply with cooling fan. Both series have PICMG 2.1 Hot Swap compliant 32/64-bit 5-slot CompactPCI backplanes and a PICMG 2.5 H.110 CT Bus.