40G ATCA Xeon Processor Blade
Dual Intel® Xeon® E5-2600 8-Core Series and High speed dual 40GBase-KR4 to fabric interface
Kontron has a full range of ATCA board and application-ready platforms for Telecom Equipment Manufacturers (TEMs) to help accelerate their network system development for LTE Evolved Packet Core, carrier cloud and content delivery applications.
TEMs designing for 40G based platforms can begin development immediately with the OM9141-40G ATCA platform which consists of a 40G chassis with advanced cooling, 40G switching, 40G packet processing, and now, 40G general purpose multicore processing capabilities.
Introducing the Kontron AT8070, a 40G ATCA Dual Xeon processor blade with the highest performance and flexibility for addressing the high traffic and increasing delivery costs of fixed broadband and wireless network applications managed by budget-constrained service providers.
For superior processing and I/O performance, the Kontron AT8070 is designed with the 8-core Intel® Xeon® processor E5-2600 family, a larger storage capacity, virtualization technology, and will support next generation Intel processors.
Kontron has developed Active Power Management, a software interface for clients to intelligently pre-set and regulate the processor power settings on its AdvancedTCA® processor blade via the Intel® Node Manager embedded in the Intel® Xeon® processor E5-2600 family. The Active Power Management fully integrates existing Kontron Management Solutions and is accessible using known standards such as IPMI and PICMG® interfaces. It allows dynamic power monitoring, power capping controls, and power threshold alerting, thus enabling platforms to achieve maximum performance and power for a single node.
– Lowest PCIe/memory latency with Dual 8GT/s QPI interfaces between CPUs
– Total of 128GB Memory (Up to 64GB via 4 DDR3 channels per CPU)
– Onboard drive 2.5″ SAS/SATA HDD/SSD
– Kontron Active Power Management via Power Node manager
– Two User-defined power level modes:
NEBS mode up to 225W; High power mode up to 350W
– Compatible with Rear Transition Module RTM8063-CC with 2 hot swap 2.5” SAS/SATA hard drives
– Support for IPMI v2.0
