AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O
Manufacturer: Acromag, Inc.

Two IP module slots. Front access I/O. Plug-and-play carrier configuration and interrupt support.

The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the front connectors for easy cable access.

Performance Specifications

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID, interrupt and memory spaces. With full access to the IP module’s programmable registers, you can easily configure and control their operation from the CompactPCI bus.

Up to two interrupt requests are supported for each IP module. All board interrupts are mapped to PCI bus INTA# signal.

Individual passive filters on each IP power supply line provide optimum filtering and noise isolation between the IP modules and the carrier board.
IP Compliance (ANSI/VITA 4)

Meets IP specs per ANSI/VITA 4-1995 (8MHz and 32 MHz operation) and IP I/O mapping to the front panel.
Electrical/mechanical interface Supports single or double size IP modules.
IP Module I/O space, ID space, INT, and MEM space supported.
Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles via access to IP INT space.

CompactPCI bus Compliance: Meets PCI specification: V2.1 and PICMG 2.0, R2.1.

Features and Benefits:
Two industry-standard IP module slots
Board resides in memory space
Supports 8 and 32MHz operation
Supports IP module I/O, ID, INT, and MEM spaces
100 I/O points with front access
High-density front connectors
Compatible with all CompactPCI CPUs
Compatible with 32-bit and 64-bit
CompactPCI® and PXI™ backplane
Plug-and-play carrier configuration and interrupt support
Two interrupt channels per IP module
Front panel LEDs
Supervisory circuit for reset generation
Individually filtered and fused power to each IP
Ruggedized with ESD strip and EMC front panel
Easily integrate IPs with your software using RTOS VxWorks, Linux, or Win DLL for
Windows® 2000/XP/Vista/7 32-bit systems.

Other Acromag, Inc. Products

ProductManufacturerCategorySubcategoryMore Info