Manufacturer: Acromag, Inc.
Manufacturer's Product Page: AcPC341
Datasheet: AcPC341

AcPC341: Analog Input CompactPCI Board, Simultaneous Conversion

• 16 differential inputs

• ±10V DC input range

• Eight 14-bit A/D converters with simultaneous sample and hold

• 8µS conversion time for 8-channel bank

AcPC341 boards provide fast, high resolution, simultaneous A/D conversion of eight channels.

These boards have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. All 16 channels share two generous 512-sample memory buffers. Conversion of each bank requires only 8µS, and all 16 channels can be sampled in just 16µs.

This board is ideal for high-speed data acquisition. A large memory buffer reduces CPU interactions for increased overall performance.

Flexible configuration options give you extensive control over the conversion process. The channels or bank to be converted, timing, scan mode, and other parameters are user-programmable. Interrupt support adds further control to interrupt upon a programmable threshold when the data in memory exceeds the set threshold.

Features & Benefits
• 16 differential inputs (±10V DC input range)
• Eight 14-bit A/D converters with simultaneous sample and hold capability
• 8µS conversion time (125KHz) for 8-channel bank
• Two 512-sample memory buffers
• Data tagging for channel identification
• Programmable conversion timer
• Programmable channel conversion control
• External trigger input and output
• Continuous and single-cycle conversion modes
• Interrupt generation for memory full threshold conditions
• Precision calibration voltages stored on-board
• 0 to 70°C (-40 to 85°C E version)

Analog Inputs
Input channels: 16 differential.
A/D resolution: 14 bits.
Input range: ±10V.
Maximum throughput rate:
Eight channels can be simultaneously acquired.
One channel: 125KHz (8μS/conversion)
8 channels (same bank): 1MHz (8μS/8 channels)
16 channels (high & low banks): 1MHz (16μS/16 ch. at
maximum 2.2K ohm source resistance).
Data sample memory: Two 512-sample memory buffers allows writing to one buffer while reading from the other.
A/D triggers: Internal timer, external, and software.
Internal conversion timer: User-programmable delay between simultaneous conversion of 8-channel banks.
Maximum delay is 2.09 second interval.
System accuracy: 2.4 LSB (0.014%).
Data format: Binary two’s compliment.
Overvoltage protection: ±25V (power on), ±40V (off).

Other Acromag, Inc. Products

ProductManufacturerCategorySubcategoryMore Info