Get your COM Express project off to a fast start with the Express-BASE6 COM Express carrier board. The Express-BASE6 supports Basic and Compact Type 6 COM Express modules. Standard features include seven PCI Express X1 slots, one PCI Express X16 slot, one PCI Express Mini slot, LPC-based Super I/O and dual BIOS support. The carrier board includes connectors for digital and analog video, USB, Ethernet, SATA, serial and audio interfaces. Specific features are COM Express module dependent.
The Express-BASE6 simplifies software development and prototyping while the target application carrier board is designed. Take advantage of Sealevel’s carrier board development services for the fastest time to market. Our extensive library of proven I/O circuits including serial, analog, and digital functionality simplifies the design process and can be easily optimized to meet the specific I/O count, voltage ranges and connector types required for your application.
Features
COM Express Type 6 reference carrier board in standard ATX form factor
Supports Basic and Compact Type 6 COM Express modules that are compliant with PICMG COM Express Revision 2.0
Includes seven PCI Express X1 slots, one X16 slot, and one Mini PCI Express slot
Three Digital Display Interfaces (DDI) supporting DisplayPort, HDMI, and DVI displays
Integrated Realtek high definition audio codec
Integrated Winboard Super I/O on LPC bus
Integrated I2C to GPIO bridge for digital I/O
Onboard diagnostic LEDs for BIOS post code data and address on LPC bus
Onboard socket for secondary SPI flash BIOS
Two 220-pin COM Express Type 6 connectors
One DB15 for analog VGA display
One 34-pin header for LVDS
One 8-pin header for flat-panel control
Four SATA connectors (module dependent)
One Gigabit (10/100/1000BaseT) Ethernet RJ45 port
Up to Eight USB 2.0 ports (Up to four ports can be USB 3.0 if supported by module)
One DB9M serial port; one 10-pin header for serial interface
Six 3.5mm connectors for microphone/audio line-in and line-out
Two 6-pin mini-DIN connectors for keyboard and mouse
One 20-pin header for LPC bus debug
One 10-pin header for Smart Battery management communications
Additional connectors for SMBus, I2C, reset, power LED, HDD LED, buzzer and module control signals
ATX form factor works with standard ATX power supplies and enclosures
