32-Bit CompactPCI Backplane

Manufacturer

Elma Electronic Inc.

Contact

Justin Moll

Manufacturer's Product Page

32-Bit CompactPCI Backplane

Datasheet

Download

Category

CompactPCI®

The Elma Bustronic CompactPCI backplane series is designed to be fully compliant with PICMG standards. The 32-bit cPCI line offers hundreds of I/O pins across the backplane that on the 64-bit version are defined and therefore unavailable. We have provided all the standard features required for full compatibility, including all pin connections for bussed signal lines and all defined power and ground pins connected to their respective planes. User defined VI/O is standard.
All of Bustronic’s standard CPCI backplanes conform to the PICMG basic specification 2.0 R2.1 and Hot Swap specification 2.1 R1.0. They are designed to maximize performance, minimize noise, and give the customer the most reliable, cost-effective products possible. To achieve superior performance, we construct the board in eight layers-three signal layers, five power ground planes. We incorporate a full stripline design, generously distributed decoupling capacitors, and 2 oz. power and ground planes. Our standard design with two 2oz. copper ground planes fully shield the backplane, minimize EMI/RFI emissions susceptibility, minimize crosstalk, and maximize power distribution.
Two 2 oz. copper voltage planes allow us to maximize power distribution while they act as virtual ground planes for the signals in order to minimize noise and crosstalk. There is also a full VI/O plane. We use stripline construction to assure the highest possible performance. By exclusively utilizing stripline construction, we eliminate a significant source of EMI/RFI radiation and give all the signals similar characteristic impedances, virtually identical propagation delays, and minimal signal skew. All these items allow for significantly higher data transfer rates, as signal skew factors into the data transfer rate calculations four times.

FEATURES:
– Conforms to PICMG basic specification 2.0 R3.0
– Conforms to PICMG Hot Swap specification 2.1 R1.0
– 32-bit design
– 8-layer controlled impedance stripline design
– Virtually zero crosstalk
– Logical slot #1 (system controller) is right or left justified
– Comes in EasyCable and Low Profile versions