Archives

The ATC002 is a test infrastructure board for debugging the Base and Fabric channels. The board routes the channels to the front panel for easy access. Dual RS-232 ports are also available for IPMI and local management access.

Manage any number of ATCA modules during debugging and development. The VT007 can be interfaced to any ATCA chassis via cable to run as a protocol analyzer to monitor, inject, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB). A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the VT007 through the Ethernet port.

A combination of the VT000 and the VT007 can manage any number of ATCA module during development and debugging.

The VT007 utilizes the VadaTech VT001 module as its shelf manager or protocol analyzer.

The VT000 allows a single ATCA module to be powered on the bench. This allows the module to be easily accessed during debugging, testing and manufacturing. The VT000 routes the IPMI hardware address to a header for proper address and parity settings. It also routes the IPMI Bus A and B to connectors for ease of access, monitoring, cascading and connection to a Shelf Manager such as VadaTech VT007 bench-top Shelf Manager.

On each of the power rails there is a fuse. Each power rail has an LED to indicate the power rail is operational.

The VT000 has a handle on the back to allow easy removal of the module.

The power supply is 220W which can operate from 100V to 240V.