AMC105The AMC105 is a double module, mid-size (full-size optional) board based on the AMC.1 Specification. The AMC105 allows PMC/XMC to be installed in an AMC slot. The PMC PCI-X bus can run at 133MHz.

The PMC/XMC J4 connector is routed to the front panel of the AMC module as a standard option via the Mini-SCSI connector. Alternatively, a limited amount of I/O can be routed to the RTM (Zone 3) per the SLAC specification (contact VadaTech for details).

Ports 17-20 that are defined in the uTCA.4 spec are routed on board so that the Trig signals could be driven from the PMC/XMC to the backplane.

This modular approach allows a MicroTCA chassis to utilize the large numbers of PMC/XMC modules that are available in the market.


AMC104The AMC104 is a carrier for a standard PCIe Gen3/Gen2/Gen1 module with PCIe interfaceas x1, x2, x4, x8 or x16. It comes in a double module, full-size. The AMC104 routes PCIelanes on the AMC ports 4-11. The AMC104 allows extra power to the PCIe module byhaving the external power connector on board.

The AMC104 is fully compliant to the AMC.0 specification. The AMC104 allows standardcommercial PCIe Graphics or other I/O module to be incorporated into the MTCA chassis or ATCA Carriers.


The AMC-D24A4-RF2/RF4 is an extremely high performance ARM, DSP and FPGA based processing card which includes two or four integrated, flexible, wideband RF transceiver channels.

The module is aimed at LTE, LTE Advanced and 5G systems that require MIMO technologies and enables complete RF to Layer 3 wireless basestation functionality to be implemented on a single AdvancedMC card.

The module’s main processor is the TCI6638 KeyStone II DSP/ARM SoC. It includes eight C66x+ DSP cores, as well as four ARM Cortex-A15 cores for higher layer processing. The module also has two TMS320C6678 octal C66x core DSPs. All processors are closely coupled via TI’s Hyperlink interface and the Ethernet infrastructure of the card with Serial RapidIO (SRIO) backplane connectivity providing inter-card connectivity. There is also a large Kintex-7 FPGA for additional co-processing and to manage the RF interfaces.

A version with no RF channels, the AMC-D24A4, is also available.