The SANBlaze SB-AMC59 is a full or mid-height AMC module that features four (4) ports of 1Gb Ethernet, and option to accommodate two solid-state disks (SSD). Choose capacities up to 400GB, with the choice of either SLC or eMLC flash technologies.

By combining both LAN and disk functions, the SB-AMC59, is ideal for ATCA or uTCA designs that have limited slots available.

Each LAN port provides a fully independent Ethernet connection, with independent IP credentials; all ports can simultaneously achieve line-rate operation, supporting 10Base-T/100Base-Tx/1000Base-T link speeds.

Featuring an Intel 82580EB Ethernet controller, the
SB-AMC59 boasts numerous performance acceleration features that include wide internal data paths, independent transmit and receive queues, and up to 64 packet descriptors cached on-chip. TCP/UDP/IP checksum offloading, TCP segmentation assist, and large 48 KByte per port on-chip packet buffers ensure your application will attain superior performance and low latency.

The module also conforms to the PCI-express signaling defined in AMC.1.

Four 1 GbE RJ45 ports
AMC.1 Gen2 PCIe x4
AMC.3 Solid State Disk (optional)
Link/Activity/AMC LEDs
Full or Mid-height AMC form factor

AM 600/10x

AM 600/10x is a single-width, full or mid-height AdvancedMC mass storage module. The module supports either a SATA hard disk drive or two CompactFlash drives. The AM 600/10x is designed in compliance to AMC.0 and AMC.3 Type S2 (2x SATA on Ports 2 and 3). The AM 600/10x is compatible with Concurrent Technologies AMC processor modules and supports full hot swap and IPMI capabilities. The AM 600/10x is designed for use in AdvancedTCA® or MicroTCA applications in the telecommunications, scientific, and defense markets


Advanced Mezzanine Card SAS/SATA Storage AMC

Main Features

  • Single-width mid-size AMC form factor
  • SAS or SATA 2.5″ hard disk drive compatible
  • Hot-swap capable
  • AdvancedTCA and MicroTCA compatible
  • Dual port SAS drive support
  • 3.0 Gb/s interface speed support
  • Two thermal sensors to monitor on-board temperatures
  • System management compliant to PICMG3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, and IPMI1.5
  • Power-on hour counter
  • HPM.1 compliant firmware upgrade and rollback support through IPMB

The Advantech MIC-5401 is a single-width/mid-size Advanced Mezzanine Card (AMC) designed to support a 2.5″ SAS or SATA hard disk drive to work as an enterprise storage module on an ATCA platform or in a MicroTCA shelf. The 2.5″ hard disk drive is connected to the AMC port 2 (SAS and SATA) and port 3 (SAS only) according to the AMC.3 specifications. Dual port SAS drives may be used on the MIC-5401 to increase the interface bandwidth of failover support between dual hosts in fault tolerant environments.

Like all other standard AMC modules, an IPMI-based module management controller (MMC) is also implemented on the MIC-5401 to serve as a communication interface to the Carrier Management Controller on an ATCA platform, or to the MicroTCA Carrier Management Controller on the MicroTCA Carrier Hub in a MicroTCA shelf. As a local IPMI controller on the AMC, it manages all hot-swap activities, E-keying, and hardware heath monitoring such as voltages (12V, 5V, and management power 3.3V) and on-board temperatures (including hard disk drive’s ambient temperature).

The MIC-5401’s mechanical design is optimized for a maximum of shock and vibration durability combined with a user- and service friendly mounting process for the disk drive.